High Water Pressure in Your Home? Here’s What You Need to Know

Links: Plumbing | Kodak | Plumbing in Kodak

Many homeowners in Kodak struggle with fluctuating flow and rattling pipes. When it comes to Plumbing challenges—especially those hidden underground—calling in a professional can save you time and frustration. The following real-life case shows how a Plumbing in Kodak specialist from HEP tackled a common yet potentially damaging issue: high water pressure.

Case Study: A Homeowner’s Pressure Puzzle

A homeowner noticed that outdoor spigots were delivering bursts of water so forceful they rattled nearby fixtures. On a DIY attempt, they’d repaired a small leak under the indoor pressure regulator, but the gauge still read near 100 psi—far above the recommended range. Concerned this could strain water heaters, dishwashers, and irrigation lines, they booked a service call.

How a HEP Technician Diagnosed the Issue

A skilled HEP technician arrived and performed straightforward pressure checks at both front and back hose bibs. The readings confirmed the problem: the street supply was erratic and the existing in-home regulator could no longer keep things in check.

This photo shows brand-new valves and fittings, all set for a precise, leak-free installation.

Upgrading to Dual Regulators

Rather than rely on a single point of control indoors, the technician recommended installing two regulators in an outdoor box near the main meter. Steps included:

• Excavating around the meter to remove the old valve
• Setting up a pair of matched regulators on a common tee
• Protecting the assembly in a sturdy yard box
• Testing the new system for steady, safe pressure

This image highlights proper trench preparation with gravel for support and drainage.

After installation, pressures settled into a healthy range and no leaks were found.

Restoring a Neat Finish

With testing complete, the trench was backfilled and grass seed was set aside for a quick yard recovery. Beneath the surface, everything was tightened, tested, and ready for years of smooth performance.

Even out-of-sight plumbing deserves a polished finish—secure covers and level ground help prevent accidental trips or damage.

Inside the home, exposed pipes were left organized and bundled neatly before walls were closed up.

Key Takeaways for Homeowners

1. Check Your Pressure Regularly
Outdoor faucets and simple gauges can alert you if pressure climbs above about 80 psi.

2. Invest in Quality Regulation
Dual-regulator setups provide redundancy, protecting appliances and pipes from sudden spikes.

3. Choose Outdoor Access
Placing regulators in a yard box makes maintenance easier and keeps indoor walls unscathed.

4. Inspect After Work
Always verify that covers are secure, trenches are properly refilled, and any disturbed landscaping is leveled.

Tackling high water pressure doesn’t have to be daunting. With a few smart upgrades and guidance from a trusted HEP technician, you can protect your home’s plumbing system—and enjoy consistent, gentle flow at every faucet. If you’re in Kodak and need reliable Plumbing in Kodak, don’t hesitate to reach out for professional support.