Water Heater

HEPWater Heater

Water Heater | Tankless Water Heater Install | Plumbing | Ten Mile

Upgrade your Ten Mile home with endless hot water and lower energy bills when you trust HEP for your tankless water heater install. Our certified plumbers size the perfect unit for your family, remove your old tank, and handle every connection with precision—usually in a single visit. You’ll enjoy on-demand comfort, extra closet space, and a system that lasts twice as long as conventional tanks.

From transparent up-front pricing to our famous “Happy HEP” satisfaction guarantee, we make the whole process simple and stress-free. Schedule today and see why neighbors all over Ten Mile count on HEP for fast, friendly service and reliable hot water, 365 days a year.

FAQs

What are the main advantages of upgrading to a tankless water heater for my Ten Mile home?

Tankless units heat water on demand, so you never run out of hot water, even during back-to-back showers. Because they don’t keep 40–50 gallons hot all day, they can cut energy use by 25–40 % compared with a standard storage tank. They’re also wall-mounted, freeing up floor space, and have a life expectancy of 18–20 years—almost twice that of a conventional heater. In Ten Mile’s moderate climate, the reduced standby heat loss and longer lifespan translate into lower utility bills and fewer replacements over time.

How long does a professional tankless water heater installation usually take?

Most retrofits in Ten Mile can be completed in one working day. We start by performing a site assessment, shutting off gas, water and power, and draining the old tank (1–2 hours). We then remove the existing unit, mount the tankless heater, run new venting, upsize the gas line if needed and connect water, gas and power (4–5 hours). Finally, we purge air, test for leaks, set the temperature and show you how to operate and maintain the system (1 hour). Complex installs—such as relocating the heater or upgrading the electrical service—can extend the job into a second day, but we’ll give you a firm timeline before work begins.

Will a tankless water heater provide enough hot water for my family?

Yes, provided the unit is sized correctly. We calculate the peak flow rate you need (for example, one shower + kitchen sink = ~4 gpm) and the temperature rise required to go from Ten Mile’s average incoming water temperature (about 55 °F) to your preferred 120 °F set-point. Modern gas tankless models can deliver 7–11 gpm at that temperature rise—enough for two showers and a dishwasher running at the same time. Electric tankless systems are more limited in flow and may require upgraded service panels, so we typically recommend gas for whole-house applications. During our free estimate we measure your demand and recommend a model that won’t leave you with cold water.

How do I know what size and model tankless heater I need?

Sizing is based on two factors: (1) total gallons per minute (gpm) you expect to use simultaneously and (2) the required temperature rise. We count each fixture (shower ≈ 2 gpm, washer ≈ 1.5 gpm, etc.) and add them up. Then we subtract the incoming water temperature (≈55 °F in Ten Mile) from the desired output temperature (120 °F). A family using 6 gpm at a 65 °F rise would need a unit that can supply 390 gpm-°F, which corresponds to a 180,000 BTU gas model. We work with leading brands like Rinnai, Navien and Noritz, provide load calculations, and explain the pros and cons of condensing vs. non-condensing models so you get the most efficient unit for your budget.

What kind of maintenance does a tankless water heater require, and can your team handle it?

To ensure peak efficiency and warranty protection, manufacturers recommend a yearly service: flushing the heat exchanger with a vinegar solution to remove scale, cleaning the inlet filter, inspecting the burner and vent, and checking error codes. In Ten Mile’s moderately hard water (6–8 grains per gallon), scale buildup can reduce efficiency by 10 % in just two years if not addressed. Our plumbers offer affordable annual maintenance plans that include descaling, performance checks and software updates. We also handle warranty repairs for all major brands, so you have one point of contact for installation, service and any future needs.

Are there rebates or incentives available in Ten Mile for installing a tankless water heater?

Yes. Many local utility districts in Meigs and surrounding counties offer $150–$300 rebates for ENERGY STAR® gas tankless units. Tennessee Valley Authority (TVA) occasionally provides additional incentives through its EnergyRight program. At the federal level, the Inflation Reduction Act extends a 30 % tax credit (up to $600) for qualifying high-efficiency equipment installed through 2032. We stay up to date on these programs and will file the paperwork or provide the documentation you need to claim them, ensuring you get the maximum savings on your new installation.

HEP
Book Online
(423) 819-7773