Energy Efficiency

HEPEnergy Efficiency

Energy Efficiency | Lighting Upgrades | Electrical | Talbott

Breathe new life into your Talbott home or business with HEP’s energy-smart solutions. Our licensed electricians replace inefficient fixtures with sleek LEDs that shine brighter, last longer, and slash utility bills—often by up to 70 %. From design consultation to safe, dust-free installation, we handle every detail so you can simply flip the switch and enjoy crisper light, lower maintenance, and an instant boost in curb appeal.

Because no two properties are alike, we tailor each project to your goals, budget, and schedule, leveraging rebates and warranties to maximize value. Whether you need subtle accent lighting in a historic bungalow or a complete warehouse retrofit, our team delivers code-compliant lighting upgrades that pay for themselves in savings and comfort. Schedule your free assessment today and see how effortless efficiency can be with HEP.

FAQs

What are the main advantages of upgrading to energy-efficient lighting in Talbott?

Modern LED and high-efficiency fixtures use up to 75 % less electricity than traditional incandescent or metal-halide lamps, which translates to lower monthly power bills, reduced HVAC load because LEDs emit less heat, and far fewer lamp replacements. For homes this means immediate savings and better light quality, and for Talbott businesses it can improve productivity, enhance merchandising, and help meet sustainability targets.

Which lighting technologies and control options do you install?

We design and install a full range of high-efficiency solutions: screw-in and linear LEDs, high-bay and low-bay fixtures, flat-panel troffers, outdoor wall packs and pole lights, as well as smart controls such as occupancy sensors, daylight harvesting photocells, dimming drivers, and cloud-based scheduling systems. All equipment is UL-listed and DLC-qualified to ensure safety and to unlock utility rebates available in Tennessee.

How much money can I expect to save after a lighting upgrade?

Savings depend on your existing wattage, operating hours, and local energy rates. In Talbott, the average blended commercial rate is about 11 ¢/kWh. Swapping a 400 W metal-halide high-bay for a 150 W LED that runs 12 hours a day saves roughly 1,100 kWh per year, or about $120 per fixture. Typical whole-building retrofits generate 40–60 % reductions in lighting costs and achieve payback in 1–3 years when rebates are applied.

Are there rebates or financing programs available in Talbott for energy-efficient lighting?

Yes. TVA’s EnergyRight program offers prescriptive rebates for qualified LED fixtures and sensors, often covering 10–30 % of the material cost. In addition, many Jefferson County and State of Tennessee small-business customers can bundle the remaining cost into on-bill financing with 0 % interest for up to five years. We handle all paperwork—audit documentation, rebate applications, and post-installation verification—so you receive the incentives with minimal effort.

What is the step-by-step process for a lighting retrofit with your team?

1) Free on-site assessment: we measure existing fixtures, light levels, and energy usage. 2) Proposal & ROI model: you receive a detailed report with fixture counts, projected savings, rebates, and payback. 3) Scheduling & material procurement: once approved, we order DLC-listed products and coordinate around your business hours. 4) Installation: licensed electricians remove old gear, install new fixtures and controls, and recycle lamps per EPA guidelines. 5) Commissioning & training: we aim, program, and test the system, then show you how to use any smart controls. 6) Final inspection & rebate submission: we provide as-built documentation and submit all rebate forms for you.

Will the upgrade disrupt my operations or require closing my facility?

In most cases, no. For commercial clients we stage work in zones during off-peak hours, evenings, or weekends to keep production lines, sales floors, and offices running. Power is isolated only in the area being retrofitted, and most fixtures can be swapped in 15–30 minutes. Residential projects are usually completed in a single day with minimal disruption. We always follow OSHA lock-out/tag-out procedures and clean the workspace before we leave.

HEP
Book Online
(423) 819-7773