Electrical Upgrades
Electrical Upgrades | Whole Home Rewires | Electrical | Lookout Mountain
When the lights flicker or you’re tripping breakers every time the coffee maker and hair dryer run together, it’s time to call the experts who know Lookout Mountain homes inside and out. HEP’s licensed electricians replace outdated wiring with modern, code-compliant systems that boost capacity, improve safety, and set you up for the smart devices of tomorrow. From the first inspection to the final walkthrough, we handle the permits, protect your décor, and keep you in the loop so there are no surprises—just reliable power and peace of mind.
Our team has completed hundreds of whole home rewires across the region, and each project comes with transparent pricing, clear timelines, and the support of HEP’s 24/7 service network. Whether you’re renovating a historic cottage or future-proofing a growing family home, we bring the same craftsmanship and courtesy that have made us a trusted neighbor for decades. Let us upgrade your wiring today so you can plug in, power up, and enjoy Lookout Mountain living without limits.
FAQs
Why would a Lookout Mountain homeowner need a whole-home rewire?
Many houses on Lookout Mountain were built before modern electrical codes existed and still rely on outdated knob-and-tube, cloth-wrapped, or 1970s aluminum branch-circuit wiring. These systems are not only undersized for today’s power needs, they’re also a leading cause of arc-fault fires and nuisance breaker trips. A full rewire replaces every branch circuit with copper conductors, upgrades receptacles to grounded three-prong outlets, adds AFCI/GFCI protection, and generally raises service capacity to 150–200 amps, making the home safer, more energy-efficient, and ready for high-demand appliances such as heat pumps, induction ranges, EV chargers, and home-office electronics.
How long does a complete rewire take and will I have to move out?
A typical 2,000-square-foot Lookout Mountain residence takes 5–10 working days to rewire, depending on attic/crawl-space accessibility and wall-surface materials (plaster, drywall, log, stone). We work circuit-by-circuit, so you’ll have limited power each evening, but you can usually remain in the house. For faster projects or homes with extensive plaster or historic finishes, we can schedule phased work or temporary power solutions. Occupants with remote-work or medical equipment needs should discuss dedicated circuits and generator hookups in advance so disruptions are minimized.
What permits and inspections are required in Lookout Mountain?
All whole-home rewires must be performed under an Electrical Permit issued by the municipality that governs your specific side of the mountain—Lookout Mountain, Tennessee (Hamilton County) or Lookout Mountain, Georgia (Dade County). The permit fee is based on service size and number of circuits. Two inspections are mandatory: a rough-in inspection when the new cables are stapled but walls are still open, and a final inspection after devices/fixtures are set and the service is energized. We coordinate both inspections, provide load calculations that satisfy the 2023 National Electrical Code (NEC) adoption schedule, and remain onsite to address any inspector questions.
Will rewiring increase my home’s resale value and lower insurance premiums?
Yes. Local real-estate agents report that buyers routinely negotiate $15,000–$25,000 off list price when knob-and-tube or aluminum wiring is disclosed. A documented rewire eliminates that deduction and can even justify a premium. In addition, many insurers either surcharge or decline coverage for pre-1960 wiring methods; once the rewire is complete and you supply the Certificate of Completion, most carriers will remove the surcharge and some offer 5–10 % discounts for homes with AFCI/GFCI protection.
Can the new wiring handle future technology such as solar panels, battery backup, and smart-home devices?
Absolutely. During a rewire we install a modern 150- or 200-amp main panel with space for solar PV breakers, generator interlock kits, and branch circuits dedicated to EV chargers or battery storage in the garage. All receptacle boxes are sized for in-wall smart switches and low-voltage conduit runs for data cables. If you’re considering rooftop solar, we can add a solar-ready AC disconnect and conduit stub to the attic now so you avoid costly retrofits later.
How much does a whole-home rewire cost in Lookout Mountain and what financing options are available?
Pricing varies with square footage, number of stories, and wall/ceiling finishes, but most projects fall between $8-$12 per square foot. For a 2,000 ft² home, that’s roughly $16,000–$24,000, including new service equipment, devices, and permit fees. We offer 0 % six-month same-as-cash plans, longer-term low-APR financing through TVA EnergyRight partners, and can split the job into phases (service upgrade first, branch circuits later) to fit your budget. A detailed, fixed-price proposal is provided after a free on-site evaluation.